Aluminum clean room wall panels
The use of aluminium sheet makes this type of panel particularly light thus making handling and installation operations easier and faster.
The panel is made of 10/10 thick aluminium sheet to be covered with PVC or similar material and is designed to be used in controlled contamination environments. PMA-V, pre-coated sheet, is also available.
The metal sheets are mounted on an extruded aluminium interior perimeter frame. The total thickness of the panel is 60 mm and the core infill can be polystyrene (PMA-H), aluminium honeycomb (PMZ-H) or rockwool (PMZ-R).
The panel is available in the standard dimensions 3076x1226x60 mm or can be produced according to the Client’s requirements.
The panel is designed to host preparations for electrical conduits or boxes for electrical devices, aeration grills and vision panels alike.
The complete range of panels & components give an exceptional mechanical resistance, total monolithicity of the module and significant thermal and acoustic insulation.
The patented fixing system with the CH 60 locking keys allows the removal of a single panel in-situ without affecting the others. Simply removing the silicon joint seal between the junctions and then sliding the locking key along the groove the panel can be removed and an alternative installed. Installation and maintenance times will thus be noticeably shortened and area downtime limited to a minimum.